| But I drive on the street. I
don't want a big cut off switch hanging on the back.
This solution takes a
little work, but it solves the problem. Install the master cutoff
inside the vehicle, positioned "sideways" so that the
toggle moves forward and back. Drill a hole in the toggle handle,
and attach a steel rod that will run out the back of the car,
through a hole drilled completely through one tail light assembly.
Have a spare tail light assembly on hand, so when you come home from
the drags, you remove the rod and put the cherry tail light back in
for street cruising. Next time you plan on going to the drag strip,
swap lights and reinstall the rod. Since the drilled light is for
the strip only, you can also have it marked "PUSH OFF" in
big letters so the Tech Inspectors will think you're cool.
|
